Changes to Step #4
Edit by The Hive - Jeremy —
Edit approved by The Hive - Jeremy
- Before
- After
- Unchanged
Step Lines
| + | [* 1] Slide the cable into the clamp |
|---|---|
| + | [* 1] While pulling the cable taught, tighten the clamp screw |
| + | [* 10] If using new housing it is recommend to reinstall the paddle and actuate the lever a few times to seat the housing ferrules onto the housing. After doing so, adjust the cable tension again. |
| + | [* 1] Reinstall the paddle and check the function of the lever and post, adjust cable tension as needed. |
| + | [* 1] Tighten cable fixing screw to 3N*m |
| + | [* 1] Remove the paddle |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added