Welcome to the single ring guide picker

Single ring guides are best organized by the available mounting on your frame

For ISCG mounted guides, check out the LG1 and TRS guides. These guides offer direct mount bashguards

For bikes with specific derailleur mounts, check out the TRS D-type and E-type guides

And for bikes with Seat-tube or threaded BBs, check out the XCX guides

If you have ISCG or ISCG05 tabs on your bike, you have plenty of options

For DH, we recommend The LG1 family of guides. We offer these in multiple levels and all offer bash protection and a lower roller for added security

For trail and enduro riding, the new TRS+ guide is a great choice. It offers upper guidance and a direct mount bashguard for added protection. You can also remove the bash guard if you choose

If your bike uses a E-type or D-type front derailleur mount, the TRS+ E-type and TRS+ D-type may be your only option for a guide, but they are designed to work specifically with these derailleur mounting standards

XCX guides are designed to be our lightest weight XC chainguides

They forego bash protection for weight savings

Their fit follows front derailleur standards

They use the upper slider from our legendary LG1+ chainguide

Chainline (CL) is adjustable from 50-53mm in most cases

We also make a Cyclocross specific XCX guide (named the XCXCX of course) with a road specific CL (this guide is covered on its own on page 9)

For D-type or E-type mounting, check out our TRS guides

When picking an XCX guide, you will need to know two things

How your front derailleur is normally attached to your bike

If your cranks will work within the specified chainline of the guide

We offer two different seat tube mounted XCX guides

The high clamp version for frames that use a bottom swing derailleur

The low clamp version for frames that use a top swing derailleur

Both seat tube mounted guides come with shims for the clamp to fit 28.6, 31.8 or 34.9 seat tube diameters

These shims also act as cams that allow the guides to be adjusted from a 50-53mm chainline by rotating the cam

The BB mount version of the XCX mounts under the bottom bracket.

Chainline is adjustable from 49-50mm using the included BB spacers

Due to the mounting of this guide the chainline adjustment is going to be more limited than a seat tube mounted guide, so in general we recommend those for ease of setup

For cyclocross bikes we offer the XCX CX

Chainline is adjustable from 39.5-42.5mm using the cam built into the seat tube shim and is designed around the 39t position of a traditional road bike crankset

Comes with shims to fit 28.6,31.6 and 34.9mm seat tube diameters