the hive

You're viewing the latest revision of this guide.

Older
Jan 27, 2013 - 11:01:35
Jan 27, 2013 - 11:01:35 Dec 23, 2012 - 10:12:33 Dec 21, 2012 - 01:12:06 Dec 21, 2012 - 01:12:05 Dec 21, 2012 - 01:12:05 Dec 21, 2012 - 01:12:55 Dec 21, 2012 - 01:12:54 Dec 21, 2012 - 01:12:21 Dec 21, 2012 - 01:12:20 Dec 21, 2012 - 12:12:04 Dec 21, 2012 - 12:12:00
Newer

How to change front hub endcaps - XCX+, TRS+ and LG1+

Written By: The Hive - Jeremy
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

3

Time Required

00:05:00

Sections

1

Flags

0

Tools

No tools specified.

Parts

  1. Available endcaps

    • Available endcaps

    • XCX hubs

    • 9mm QR

    • 15mm thru axle

    • TRS and LG1 hubs same endcaps used on both hubs

    • 9mm QR

    • 15mm thru axle

    • 20mm thru axle

  2. Remove the endcap by pulling firmly on it Rocking the endcap side to side can help loosen it Rocking the endcap side to side can help loosen it

    • Remove the endcap by pulling firmly on it

    • Rocking the endcap side to side can help loosen it

  3. Lightly grease the O-ring on the endcap before reinstalling Lightly grease the O-ring on the endcap before reinstalling

    • Lightly grease the O-ring on the endcap before reinstalling

Author

The Hive - Jeremy

Member since: 12/05/2012

49 Guides authored

View Statistics:

Past 24 Hours: 15

Past 7 Days: 126

Past 30 Days: 518

All Time: 44,584