the hive

How to change front hub endcaps - XCX+, TRS+ and LG1+

Written By: The Hive - Jeremy
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

3

Time Required

00:05:00

Sections

1

Flags

0

Tools

No tools specified.

Parts

  1. Available endcaps

    • Available endcaps

    • XCX hubs

    • 9mm QR

    • 15mm thru axle

    • TRS and LG1 hubs same endcaps used on both hubs

    • 9mm QR

    • 15mm thru axle

    • 20mm thru axle

  2. Remove the endcap by pulling firmly on it Rocking the endcap side to side can help loosen it Rocking the endcap side to side can help loosen it

    • Remove the endcap by pulling firmly on it

    • Rocking the endcap side to side can help loosen it

  3. Lightly grease the O-ring on the endcap before reinstalling Lightly grease the O-ring on the endcap before reinstalling

    • Lightly grease the O-ring on the endcap before reinstalling

Conclusion

Thanks for reading, now get out there and ride!

Author

The Hive - Jeremy

Member since: 12/5/12

49 Guides authored

View Statistics:

Past 24 Hours: 31

Past 7 Days: 150

Past 30 Days: 674

All Time: 51,649