the hive

You're viewing a previously published revision of this guide.  View latest revision

Older
Dec 19, 2023 - 02:12:10
Jan 18, 2024 - 10:01:16 Dec 20, 2023 - 12:12:59 Dec 19, 2023 - 03:12:38 Dec 19, 2023 - 03:12:52 Dec 19, 2023 - 03:12:50 Dec 19, 2023 - 03:12:23 Dec 19, 2023 - 03:12:46 Dec 19, 2023 - 03:12:25 Dec 19, 2023 - 03:12:12 Dec 19, 2023 - 03:12:40 Dec 19, 2023 - 03:12:08 Dec 19, 2023 - 03:12:59 Dec 19, 2023 - 03:12:50 Dec 19, 2023 - 03:12:26 Dec 19, 2023 - 02:12:46 Dec 19, 2023 - 02:12:10 Dec 19, 2023 - 02:12:39 Dec 19, 2023 - 02:12:26 Dec 19, 2023 - 02:12:17 Dec 19, 2023 - 02:12:07 Dec 19, 2023 - 02:12:21 Dec 19, 2023 - 02:12:46 Dec 19, 2023 - 02:12:00 Dec 19, 2023 - 02:12:49 Dec 19, 2023 - 02:12:21 Dec 19, 2023 - 02:12:57 Dec 19, 2023 - 02:12:03 Dec 05, 2023 - 05:12:41 Dec 05, 2023 - 05:12:12 Dec 05, 2023 - 05:12:27 Dec 05, 2023 - 05:12:46 Dec 05, 2023 - 04:12:12 Dec 05, 2023 - 04:12:11 Dec 05, 2023 - 04:12:27 Dec 05, 2023 - 04:12:45 Dec 05, 2023 - 03:12:19 Dec 05, 2023 - 03:12:19 Dec 05, 2023 - 03:12:12 Dec 05, 2023 - 03:12:09 Dec 05, 2023 - 03:12:51 Dec 05, 2023 - 03:12:24 Nov 22, 2023 - 03:11:36 Nov 22, 2023 - 03:11:01 Nov 22, 2023 - 03:11:06 Nov 21, 2023 - 05:11:01 Nov 21, 2023 - 05:11:14 Nov 21, 2023 - 05:11:53 Nov 21, 2023 - 05:11:57 Nov 21, 2023 - 05:11:46 Nov 21, 2023 - 05:11:17 Nov 21, 2023 - 05:11:43 Nov 21, 2023 - 05:11:42 Nov 21, 2023 - 05:11:26 Nov 21, 2023 - 05:11:05 Nov 21, 2023 - 05:11:11 Nov 21, 2023 - 05:11:58 Nov 21, 2023 - 05:11:24 Nov 21, 2023 - 05:11:04 Nov 21, 2023 - 05:11:18 Nov 21, 2023 - 05:11:59 Nov 21, 2023 - 05:11:30 Nov 21, 2023 - 05:11:21
Newer

Current Freehub Spacer Arrangements on all Current Hub Models

Written By: Mike Begley (and one other contributor)
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

12

Time Required

Suggest a time??

Sections

1

Flags

1

Private

Private

This guide will not appear in search results and can only be viewed by team members!

  1. Identify your hub model and proceed to the corresponding steps listed below.

    • Identify your hub model and proceed to the corresponding steps listed below.

    • SL Hub see Steps 2 to 4

    • E*Spec Race see Steps 5 to 7

    • LG1 Race DH 7 Speed see Step 8

    • XCX Gravel see Steps 9 to 11

    • XCX Race MTB see Step 12

  3. This HG Freehub requires an outer washer/spacer. These are directional and the side shown in the second image should be facing away from your freehub body towards the Driveside (R) Axle-end. This HG Freehub requires an outer washer/spacer. These are directional and the side shown in the second image should be facing away from your freehub body towards the Driveside (R) Axle-end.

    • This HG Freehub requires an outer washer/spacer. These are directional and the side shown in the second image should be facing away from your freehub body towards the Driveside (R) Axle-end.

  4. Microspline™ freehubs require an outer washer/spacer. These are directional and the side shown in the second image should be facing away from your freehub body towards the Driveside (R) Axle-end. Microspline™ freehubs require an outer washer/spacer. These are directional and the side shown in the second image should be facing away from your freehub body towards the Driveside (R) Axle-end.

    • Microspline™ freehubs require an outer washer/spacer. These are directional and the side shown in the second image should be facing away from your freehub body towards the Driveside (R) Axle-end.

  6. This HG Freehub requires an outer washer/spacer. These are directional and the side shown in the second image should be facing away from your freehub body towards the Driveside (R) Axle-end. This HG Freehub requires an outer washer/spacer. These are directional and the side shown in the second image should be facing away from your freehub body towards the Driveside (R) Axle-end.

    • This HG Freehub requires an outer washer/spacer. These are directional and the side shown in the second image should be facing away from your freehub body towards the Driveside (R) Axle-end.

  7. Microspline™ freehubs require an outer washer/spacer. These are directional and the side shown in the second image should be facing away from your freehub body towards the Driveside (R) Axle-end. Microspline™ freehubs require an outer washer/spacer. These are directional and the side shown in the second image should be facing away from your freehub body towards the Driveside (R) Axle-end.

    • Microspline™ freehubs require an outer washer/spacer. These are directional and the side shown in the second image should be facing away from your freehub body towards the Driveside (R) Axle-end.

  8. LG1 7 Speed Hubs are only compatible with our 7 Speed Integrated Cassette/Drivers, and are not able to be converted to other freehub standards.

    • LG1 7 Speed Hubs are only compatible with our 7 Speed Integrated Cassette/Drivers, and are not able to be converted to other freehub standards.

    • There are currently two compatible Cassette/Drivers which can be used with our LG1 7 Speed Hubs; FWS10-104 which has a 9-21T range; and our newly released FWS20-121 with an updated 9-24T range.

Author

with 1 other contributor

Mike Begley

Member since: 11/08/2023

3 Guides authored

View Statistics:

Past 24 Hours: 9

Past 7 Days: 70

Past 30 Days: 337

All Time: 5,997