Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Greg

Edit approved by Greg

Before
After
Unchanged

Step Lines

[title] Adjust the Low Gear Stop Screw
[* icon_caution] Note that before adjusting the low gear stop screw it may be possible to shift the chain into the spokes! Shift carefully during this process!
[* black] Thread the B-limit screw in until the slack is taken out of the chain by the derailleur
[* black] Slowly pedal the cranks forward and shift the derailleur to the lowest gear position, so that the chain is on the largest cassette sprocket.
[* black] Adjust the low gear stop screw so that the upper guide pulley is centered on the largest cassette sprocket
[* icon_note] The low limit screw is labeled “L”
[* black] Verify that the chain will not overshift into the spokes by gently pressing on the downshift paddle while pedaling the cranks forward and watching the chain movement.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added