Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by Greg

Edit approved by Greg

Before
After
Unchanged

Step Lines

[title] Install the Derailleur on the Bike
[* black] Set the clutch switch lever to OFF
[* black] Back the b-limit screw out until it no longer protrudes against the stopper plate tab
[* black] Install the Derailleur using a 5mm hex key
[* icon_note] Press the stopper plate tab against the derailleur hanger while tightening the rear derailleur fixing bolt, so that there is no gap between the b-tension stop and the tab
[* black] Finish tightening using the torque wrench with the 5mm hex bit socket: '''8-10Nm'''

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added