Changes to Step #1

Edit by The Hive - Jeremy

Edit approved by The Hive - Jeremy

Before
After
Unchanged

Step Lines

-[* black] We'll start re-assembly from inside the pillar, want to know how to take the post apart go [guide|83|here]
-[* icon_note] Slide the spoke into the cam. The 138mm spoke is for 125mm posts and the 210mm spoke if for 150mm posts.
+[* black] We'll start re-assembly from inside the pillar, want to know how to take the post apart? Go [guide|83|here]
+[* icon_note] Slide the spoke into the cam. The 138mm spoke is for 125mm posts and the 210mm spoke if for 150mm posts
[* black] Apply a small amount of medium strength threadlocker to the threads of the set screw
[* black] Turn the set screw clockwise to tighten. Tighten to 3 N*m
-[* icon_note] You may need to clamp the cam in the soft jaws to tighten the set screw. Be careful not to mar the cam.
+[* icon_note] You may need to clamp the cam in the soft jaws to tighten the set screw. Be careful not to mar the cam or cam bushing