Changes to Step #1

Edit by The Hive - Jeremy

Edit approved by The Hive - Jeremy

Before
After
Unchanged

Step Lines

+[* black] If needed, remove the set screw to access and remove the spoke
+[* icon_note] You may need to clamp the cam in the soft jaws to loosen the set screw. Be careful not to mar the cam
+[* black] Turn the set screw counter-clockwise to loosen
+[* black] Slide the spoke out of the cam
+[* black] Ready to re-assemble? Then go here

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added