Changes to Step #1
Edit by The Hive - Jeremy —
Edit approved by The Hive - Jeremy
- Before
- After
- Unchanged
Step Lines
- | [* black] If needed, remove the set screw to access and remove the spoke |
---|---|
- | [* icon_note] You may need to clamp the cam in the soft jaws to loosen the set screw. Be careful not to mar the cam |
- | [* black] Turn the set screw counter-clockwise to loosen |
- | [* black] Slide the spoke out of the cam |
- | [* black] Ready to re-assemble? Then go here |
+ | [* black] We'll start re-assembly from inside the pillar, want to know how to take the post apart go [guide|83|here] |
+ | [* icon_note] Slide the spoke into the cam. The 138mm spoke is for 125mm posts and the 210mm spoke if for 150mm posts. |
+ | [* black] Turn the set screw clockwise to tighten. Tighten to 3 N*m |
+ | [* icon_note] You may need to clamp the cam in the soft jaws to tighten the set screw. Be careful not to mar the cam. |
Image 1
Old Version
New Version
Image 3
Old Version
New Version