Changes to Step #3
Edit by The Hive - Jeremy —
Edit approved by The Hive - Jeremy
- Before
- After
- Unchanged
Step Lines
- | [* black] Remove the cap |
---|---|
- | [* red] Push the cable holder from the bottom to slide the cam assembly out of the pillar |
+ | [* black] Slide the cam spring onto the cam assembly. |
+ | [* black] Lightly grease the cam and cam bushing using Slick Honey or Slickoleum grease and slide the assembly into the pillar tube. |
+ | [* icon_caution] It is important to only use a light coating of the approved greases. Too much grease, or the incorrect grease can affect post function. |
Image 1
Old Version
New Version
Image 2
Old Version
New Version
Image 3
Old Version
New Version