Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by The Hive - Jeremy

Edit approved by The Hive - Jeremy

Before
After
Unchanged

Step Lines

+[* black] Install the pillar cap and using an M10 hex wrench, turn the pillar cap clockwise to tighten to snug
[* black] Using the 4 screws at the bottom of the pillar as flats, gently clamp them in your vise
-[* black] Using an M10 hex wrench, turn the pillar cap counter-clockwise to loosen
+[* black] Tighten the pillar cap to 2 N*m

Image 1

Old Version

New Version

Image 2

Old Version

New Version