the hive

Changes to Step #5

Edit by The Hive - Jeremy —

Edit approved by The Hive - Jeremy

Before
After
Unchanged

Step Lines

-[* black] Slide pillars bottom busing on
-[* black] Use a magnet to capture the ball at the bottom of the pillar if needed
-[* black] If you need to disassemble the pillar, re-install the 4 screws without the cap
+[* black] Slide the pillar bottom bushing on
+[* black] install the ball at the bottom of the pillar
+[* black] Remove the 4 screws and install the cap