Changes to Step #9
Edit by The Hive - Jeremy —
Edit approved by The Hive - Jeremy
- Before
- After
- Unchanged
Step Lines
+ | [* black] Now we will remove the pillar assembly from the inner tube of the seat post |
---|---|
+ | [* black] Using your T25 of another tool that fits, actuate the post just as a cable would if the post were installed |
+ | [* red] While pulling the cable tower down to release the locking mechanism, carefully slide the pillar out of the inner tube |
+ | [* yellow] Be careful here as the balls that lock the post may fall out once released. To prevent this, you can wrap the assembly in a rag before removal to contain the balls. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added