the hive

Changes to Step #12

Edit by The Hive - Jeremy —

Edit approved by The Hive - Jeremy

Before
After
Unchanged

Step Lines

-[* black] Remove the spring
-[* icon_note] The spring is not directional, so either side can go up or down
-[* black] Wiggle the post head while pulling to remove
+[* black] Clean and lightly grease inside the head of the post
+[* red] Next, install the head of the post making sure the brass key is properly seated in the head and in the keyway in the inner tube of the post
+[* black] Wiggle the post head while pushing to install

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Old Version

New Version