Changes to Step #13
Edit by The Hive - Jeremy —
Edit approved by The Hive - Jeremy
- Before
- After
- Unchanged
Step Lines
- | [* black] |
---|---|
+ | [* black] Lightly grease each end of the spring and install the spring in to the post |
[* icon_note] The spring is not directional, so either side can go up or down | |
[* icon_note] It is recommended to put the seatpost in the vise and soft jaws for this step | |
[* icon_caution] The spring is under preload and will eject with force if not supported while installing. Use caution! | |
- | [* black] Next, install the spring cap by compressing the spring while turning the cap clockwise |
+ | [* black] Next, lightly grease the threads and install the spring cap by compressing the spring while turning the cap clockwise |
+ | [* black] Tighten the spring cap to snug |