Changes to Step #13
Edit by The Hive - Jeremy —
Edit approved by The Hive - Jeremy
- Before
- After
- Unchanged
Step Lines
- | [* black] While supporting the cap and post, carefully unthread the screw and remove the spring |
---|---|
- | [* icon_note] It is recommended to leave the seatpost in the vise for this step |
- | [* icon_caution] The spring is under preload and will eject with force if not supported while removing. Use caution! |
+ | [* black] Install the spring in to the post |
+ | [* icon_note] The spring is not directional, so either side can go up or down |
+ | [* icon_note] It is recommended to put the seatpost in the vise and soft jaws for this step |
+ | [* icon_caution] The spring is under preload and will eject with force if not supported while installing. Use caution! |
+ | [* black] Next, install the spring cap by compressing the spring while turning the cap clockwise |
Image 1
Old Version
New Version
Image 3
Old Version
New Version