Changes to Step #14
Edit by The Hive - Jeremy —
Edit approved by The Hive - Jeremy
- Before
- After
- Unchanged
Step Lines
| + | [* black] Moving to the head of the post, insert the head of the post into the soft jaws of the vise |
|---|---|
| + | [* black] Using an M10 hex wrench break the screw free by turning counter-clockwise and loosen it slightly, but do not remove |
| + | [* icon_caution] The main spring is located under this screw, so caution must me used when removing the screw |
| + | [* icon_caution] The head, and only the head of the post must be supported while removing this screw. Supporting the main tube or shaft of the post while turning this screw may result in damage/binding of the seatpost keys |
Image 1
No previous image
Added
Image 2
No previous image
Added