Changes to Step #14
Edit by The Hive - Jeremy —
Edit approved by The Hive - Jeremy
- Before
- After
- Unchanged
Step Lines
- | [* black] To tighten properly, you insert the head of the post into |
---|---|
+ | [* black] To tighten properly, you must insert the head of the post into soft jaws and a vise |
[* black] Using an M10 hex wrench tighten to 20N*m | |
[* icon_caution] The main spring is located under this screw, so caution must me used when removing or tightening the screw | |
[* icon_caution] The head, and only the head of the post must be supported while removing this screw. Supporting the main tube or shaft of the post while turning this screw may result in damage/binding of the seatpost keys |
Image 3
No previous image
Added