Changes to Step #17
Edit by The Hive - Jeremy —
Edit approved by The Hive - Jeremy
- Before
- After
- Unchanged
Step Lines
[* black] If needed, remove the set screw to access and remove the spoke |
[* icon_note] You may need to clamp the cam in the soft jaws to loosen the set screw. Be careful not to mar the cam or cam bushing |
[* icon_note] You may need to clamp the cam in the soft jaws to loosen the set screw. Be careful not to mar the cam or cam bushing |
[* black] Turn the set screw counter-clockwise to loosen |
[* black] Slide the spoke out of the cam |
[* black] Ready to re-assemble? Then go here |