Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by The Hive - Jeremy

Edit approved by The Hive - Jeremy

Before
After
Unchanged

Step Lines

[* black] If needed, remove the brass post keys with a pick
[* black] The bushing at the bottom of the pillar can be replaced by removing the four T15 Torx screws at the bottom of the postpost, then removing the cap and sliding the bushing off
[* black] The bushing at the bottom of the pillar can be replaced by removing the four T15 Torx screws at the bottom of the postpost, then removing the cap and sliding the bushing off