Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by The Hive - Jeremy

Edit approved by The Hive - Jeremy

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereNow we will remove the pillar assembly from the inner tube of the seat post
[* black] Using your T25 of another tool that fits, actuate the post just as a cable would if the post were installed
[* red] While pulling the cable tower down to release the locking mechanism, carefully slide the pillar out of the inner tube
[* yellow] Be careful here as the balls that lock the post may fall out once released. To prevent this, you can wrap the assembly in a rag before removal to contain the balls
.
[* black] Insert wisdom hereNow we will remove the pillar assembly from the inner tube of the seat post
[* black] Using your T25 of another tool that fits, actuate the post just as a cable would if the post were installed
[* red] While pulling the cable tower down to release the locking mechanism, carefully slide the pillar out of the inner tube
[* yellow] Be careful here as the balls that lock the post may fall out once released. To prevent this, you can wrap the assembly in a rag before removal to contain the balls
.

Image 2

Old Version

New Version

Image 3

Old Version

New Version