the hive

/
/

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by The Hive - Jeremy —

Edit approved by The Hive - Jeremy

Before
After
Unchanged

Step Lines

[* black] InsertMoving to the head of the post, insert the head of the post into the soft jaws of the vise
[* black] BreakUsing an M10 hex wrench break the screw free by turning counter-clockwise and loosen it slightlyslightly, but do not remove
[* black] InsertMoving to the head of the post, insert the head of the post into the soft jaws of the vise
[* black] BreakUsing an M10 hex wrench break the screw free by turning counter-clockwise and loosen it slightlyslightly, but do not remove
[* icon_caution] The main spring is located under this screw, so caution must me used when removing the screw
[* icon_caution] The headhead, and only the head of the post must be supported while removing this screw. Supporting the main tube or shaft of the post and not the headwhile turning this screw may result in damage/binding of the seatpost keys
[* icon_caution] The headhead, and only the head of the post must be supported while removing this screw. Supporting the main tube or shaft of the post and not the headwhile turning this screw may result in damage/binding of the seatpost keys