Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Chris Costello

Edit approved by Chris Costello

Before
After
Unchanged

Step Lines

[* black] Make sure the axle is fully seated in the hub shell and that the pawls are ratcheting properly
[* black] Thread on the non-drive side endcap
-[* black] Using the tools provided or a pair of cone wrenches, tighten the axle to snug plus 60 degrees. The non-drive preload nut should be SNUG.
+[* black] Using the provided cone wrenches, tighten the axle to snug plus 60 degrees.
[* icon_note] We recommend checking the axle torque after the first couple rides