Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Cory Sullivan

Edit approved by Cory Sullivan

Before
After
Unchanged

Step Lines

[* black] Make sure the axle is fully seated in the hub shell and that the pawls are functioningratcheting properly
[* black] Make sure the axle is fully seated in the hub shell and that the pawls are functioningratcheting properly
[* black] Thread on the non-drive side endcap
[* black] Using the tools provided,provided or a pair of cone wrencheswrenches, tighten the axle to snug plus 45 degrees
[* blackicon_note] We recommend checking the axle torque after the first couple rides
[* black] Using the tools provided,provided or a pair of cone wrencheswrenches, tighten the axle to snug plus 45 degrees
[* blackicon_note] We recommend checking the axle torque after the first couple rides