Changes to Step #4
Edit by The Hive - Jeremy —
Edit approved by The Hive - Jeremy
- Before
- After
- Unchanged
Step Lines
[* black] '''Ex Cog hitting spokes or hub flange''' |
[* black] With certain hub or wheel |
[* black] With certain hub or wheel |
[* black] Add 0.5mm spacer under cassette – be sure to check the cassette locking for adequate thread penetration into the free hub body (your local bike shop can help with this if you are unsure) |
[* icon_note] In certain rare cases a 1mm spacer may also need to be added under the rear derailleur. This depends on frame design and may be needed if derailleur limit screws are reaching their maximum due the extra 0.5mm spacer |
[* black] Still having problems? Drop us a line at support@bythehive.com |