Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by The Hive - Jeremy

Edit approved by The Hive - Jeremy


Step Lines

[* black] '''Ex Cog hitting spokes or hub flange'''
[* black] With certain hub or wheel designs the EX Cog may be very close to the spokes or hub flange, or even interfere with them.
[* black] Add 0.5mm spacer under cassette – be sure to check the cassette locking for adequate thread penetration into the free hub body (your local bike shop can help with this if you are unsure)
[* icon_note] In certain rare cases a 1mm spacer may also need to be added under the rear derailleur. This depends on frame design and may be needed if derailleur limit screws are reaching their maximum due the extra 0.5mm spacer
[* black] Still having problems? Drop us a line at