Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by The Hive - Jeremy

Edit approved by The Hive - Jeremy


Step Lines

[* black] Install the guide on the bike
[* black] For BB mount guides, start with the BB spacer mounted between the chainguide and the frame
[* black] Remove the drive side BB cup and slide the guide over the BB
[* icon_note] Clean any grease off of the mounting face of the guide and BB, this will help keep the guide from rotating on impact
[* black] Snug down the BB
[* black] Slide the cranks into the BB and make sure the cranks are fully seated against the BB
[* black] sight down the back of the bike and make sure the chainrings are centered over the roller, adjust the 0.5mm spacer as needed to center the rings over the roller

Image 2

No previous image