Changes to Step #5
Edit by The Hive - Jeremy —
Edit approved by The Hive - Jeremy
- Before
- After
- Unchanged
Step Lines
| [* black] Clock the guide such that the upper slider is at 11-12 o’clock position |
| [* black] Remember that if you have a longer travel bike the guide will rotate slightly as the bike run through its travel, you can see on this V10 that we have the guide closer to 12 o'clock to protect the lower roller |
| [* black] On bikes with dropped chainstays such as the Intense 951, frame interference may force the guide into incorrect clocking, this will make the lower roller more prone to impacts |
| [* black] Tighten ISCG bolts to 6nm |