Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by The Hive - Jeremy

Edit approved by The Hive - Jeremy

Before
After
Unchanged

Step Lines

[* black] Using the provided ISCG washers between the backplate and the ISCG tabs (or adapter)adapter, position the guide such that the seam on the upper slider isand the lower roller are centered on the chainring
[* black] Using the provided ISCG washers between the backplate and the ISCG tabs (or adapter)adapter, position the guide such that the seam on the upper slider isand the lower roller are centered on the chainring
[* black] The same number of spacers should be used under each of the three mounting bolts
[* black] If using more than 2mm of spacers, use the longer bolts

Image 1

No previous image

Added

Image 2

No previous image

Added