Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by The Hive - Jeremy

Edit approved by The Hive - Jeremy

Before
After
Unchanged

Step Lines

[* black] A couple important facts before we get started:
[* black] ISCG adapters are for use with single ring chainguides only, do not use with dual ring guides
[* black] Your cranks must have at least a 50mm chainline to work with and ISCG adapter. If your cranks have a narrower chainline the ISCG adapter will not work.
[* black] ISCG adapters are for use with BSA threaded bottom brackets only. They will not work with pressfit BBs
[* black] Remove your bottom bracket cup and install the adapter, replacing the 2.5mm spacer that is closest to the frame. If there is only one spacer, replace it.
[* black] If there is no spacer, contact your crank and bottom bracket manufacturer
[* black] Be sure the flat side of the adapter is facing outward
[* black] Remove all grease from the mounting face of the adapter; this will help to keep it from spinning on impact