Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by The Hive - Jeremy

Edit approved by The Hive - Jeremy

Before
After
Unchanged

Step Lines

[* black] Remove your bottom bracket cup and install the adapter, replacing the 2.5mm spacer that is closest to the frame. If there is only one spacer, replace it.
[* black] If there is no spacer, contact your crank and bottom bracket manufacturer
[* black] Be sure the flat side of the adapter is facing outward
[* black] Remove all grease from the mounting face of the adapter; this will help to keep it from spinning on impact