Skip to main content

Site Navigation

Your Account

Choose Language

Changes to this Step

Edit by The Hive - Jeremy

Edit approved by The Hive - Jeremy

Before
After
Unchanged

Step Lines

[title] step 1
[* black] PF30 frames should have a inner diameter of 46mm
[* black] The can be 68mm, 73mm or 83mm wide
[* black] Start be measuring your BB shell, write this down as we will need it later
[* black] step 2
[* black] Grease the bearing seats and center threads of the BB
[* black] Thread the BB together making are that the drive side of the BB is properly positioned in the frame
[* black] step 3
[* black] Using an e*thirteen BB tool, a 10mm hex bit and a torque wrench, tighten the BB to Xnm