the hive

How to install e*thirteen tire sealant

Written By: The Hive - Jeremy
  • Comments: 0
  • Favorites: 0

Difficulty

Very easy

Steps

4

Time Required

00:05:00

Sections

1

Flags

0

  1. Before installing sealant, double check tubeless tape and valve fit, and make sure the tire is clean and free of any old sealant

    • Before installing sealant, double check tubeless tape and valve fit, and make sure the tire is clean and free of any old sealant

    • Recommended safety precautions: Don't drink tire sealant, wear gloves and eye protection and maintain good ventilation. See attached MSDS for more information

  2. Shake the sealant bottle vigorously for 30 seconds Using the table, determine the proper amount of sealant for your tire size

    • Shake the sealant bottle vigorously for 30 seconds

    • Using the table, determine the proper amount of sealant for your tire size

    • Remove one side of the tire from the rim

  3. Pour sealant directly into the tire Use the CC gauge on the bottle to measure the correct amount of sealant

    • Pour sealant directly into the tire

    • Use the CC gauge on the bottle to measure the correct amount of sealant

    • CC and ML are equivalent

  4. Seat the tire back on the rim and inflate Seat the tire back on the rim and inflate

    • Seat the tire back on the rim and inflate

Conclusion

Thanks for reading, now get out there and ride!

Author

The Hive - Jeremy

Member since: 12/05/2012

50 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 18

Past 30 Days: 98

All Time: 6,369