Remove upper slider fixing bolt

Pull the front of the slider out to release it from the back plate

Remove the lower slider fixing bolt, this will release the lower slider

Remove the bolt from the slider, this will release the roller

To remove the direct mount bashguard, remove the fixing bolts from the back of the guide

The direct mount bashguard is keyed into the back plate, to remove the direct mount bashgaurd pull firmly on the back of the bashguard

To replace the bashguard, press firmly to seat it. Note the different positions for narrow, regular and wide positons

reinstall the lower roller and slider, note the positions for different chainring sizes

Torque the lower slider fixing bolt to 0.5nm or just past snug, be careful not to over-tighten

To replace the upper slider, insert the slider into the keyway

Line up the nut with the bolt hole and click the head of the nut into the slider

Tighten the nut to 0.5nm or just past snug. Do not over tighten as this can damage the slider

Assemble the lower slider

Align the lower slider nut with the bolt

Tighten the nut to 0.5nm or just past snug. Do not over tighten as this can damage the slider