Site Navigation

Your Account

Choose Language

Tools

Parts

No parts required.

XCX D-type guides will accommodate chainlines from 49- 53.5mm
  • XCX D-type guides will accommodate chainlines from 49- 53.5mm

  • For more information on determining your chainline, please see Chainline explained

  • For this retention device we adjust chainline using spacers between the chainguide backplate and the frame

Add Comment

Start by loosening the upper slider bolt and opening the upper slider
  • Start by loosening the upper slider bolt and opening the upper slider

Add Comment

  • Install the guide on the frame with the thinner of the two black T spacers and the shorter of the two gold bolts

  • This will put the chainguide at a 49mm chainline

Add Comment

  • Close the upper slider and sight down the front of the guide and chainring

  • Add the silver spacers under the guide until the split in the chainguide is centered over the chainring

  • Use the chart to determine the correct spacer, T spacer and bolt length for your application

    • Most bikes will use the thin black T spacer and one or two of the silver spacers

Add Comment

  • Torque the fixing bolt to 6nm

Add Comment

  • Adjust the upper slider for your chainring size by sliding on the back plate

    • There should be ~3mm between the top of the chainring teeth and the slider

  • Torque the upper slider bolt to 0.5nm or just a bit past snug

    • Do not over-tighten the slider bolt

Add Comment

Conclusion

Thanks for reading, now get out there and ride!

Dozuki System

Member since: 09/24/2009

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 25

All Time: 502