the hive

You're viewing a previously published revision of this guide.  View latest revision

Older
Oct 03, 2014 - 11:10:30
Oct 15, 2014 - 11:10:01 Oct 15, 2014 - 11:10:00 Oct 15, 2014 - 11:10:32 Oct 03, 2014 - 11:10:00 Oct 03, 2014 - 11:10:54 Oct 03, 2014 - 11:10:48 Oct 03, 2014 - 11:10:28 Oct 03, 2014 - 11:10:28 Oct 03, 2014 - 11:10:16 Oct 03, 2014 - 11:10:00 Oct 03, 2014 - 11:10:08 Oct 03, 2014 - 11:10:08 Oct 03, 2014 - 11:10:41 Oct 03, 2014 - 11:10:02 Oct 03, 2014 - 11:10:33 Oct 03, 2014 - 11:10:52 Oct 03, 2014 - 11:10:30 Oct 03, 2014 - 11:10:29 Oct 03, 2014 - 11:10:10 Oct 03, 2014 - 11:10:53 Oct 03, 2014 - 11:10:53 Oct 03, 2014 - 11:10:50 Oct 03, 2014 - 11:10:30
Newer

Ex Cog Troubleshooting guide

Written By: The Hive - Jeremy
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

2

Time Required

00:10:00

Sections

1

Flags

1

Private

Private

This guide will not appear in search results and can only be viewed by team members!

  1. In this guide we discuss three potential issues with the EX cog

    • In this guide we discuss three potential issues with the EX cog

    • Skipping

    • Upshift and/or downshift problems (skip ahead to step X)

    • EX cog interference with hub shell or spokes (skip ahead to step X)

  2. Skipping

    • Skipping

    • We recommend following the steps below to diagnose and repair a skipping problem

    • Check your derailleur function to be sure the high limit screw is properly adjusted and that the derailleur is indexing properly. For help with that, check out our derailleur adjustment guide.

    • Check the B-limit screw. If the B-limit screw is too far from the cassette it can cause shifting/skipping problems. Check out our set-up guide for how to properly adjust a B-limit screw

Author

The Hive - Jeremy

Member since: 12/5/12

49 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 10

Past 30 Days: 38

All Time: 8,205