Site Navigation

Your Account

Choose Language

Tools

Parts

No parts required.

First, unlock the two halves of the cassette, this can be accomplished in two ways:
  • First, unlock the two halves of the cassette, this can be accomplished in two ways:

    • Using two chain whips with the wheel off the bike

    • Using one chain whip with the wheel on the bike

Add Comment

If using the two chain whip method, put one chain whip on each half of the cassette. Orient the chain whip on the aluminum portion of the cassette to turn the cassette clockwise. Orient the chain whip on the steel portion of the cassette to turn counter-clockwise.
  • If using the two chain whip method, put one chain whip on each half of the cassette.

  • Orient the chain whip on the aluminum portion of the cassette to turn the cassette clockwise.

  • Orient the chain whip on the steel portion of the cassette to turn counter-clockwise.

  • Turn the chain whips until the arrow on the steel sprocket assembly reaches the unlock arrow.

Add Comment

If only using one chain whip, leave the wheel on the bike and shift the chain into one of the aluminum sprockets. Put the chain whip on the steel portion of the cassette, orient it to turn the steel sprocket assembly counter-clockwise. While holding tension on the chain by using the cranks, turn the chainwhip counter clockwise until the arrow on the steel sprocket assembly lines up with the unlock arrow on the aluminum piece.
  • If only using one chain whip, leave the wheel on the bike and shift the chain into one of the aluminum sprockets.

  • Put the chain whip on the steel portion of the cassette, orient it to turn the steel sprocket assembly counter-clockwise.

  • While holding tension on the chain by using the cranks, turn the chainwhip counter clockwise until the arrow on the steel sprocket assembly lines up with the unlock arrow on the aluminum piece.

Add Comment

Once you have turned the cassette to the unlock position, remove the steel sprocket assembly from the hub. Once you have turned the cassette to the unlock position, remove the steel sprocket assembly from the hub.
  • Once you have turned the cassette to the unlock position, remove the steel sprocket assembly from the hub.

Add Comment

Put the chain whip on the aluminum piece, orient it to pull the sprocket clockwise. Using an e*thriteen Bottom Bracket (BB) tool, loosen the cassette lockring.
  • Put the chain whip on the aluminum piece, orient it to pull the sprocket clockwise.

  • Using an e*thriteen Bottom Bracket (BB) tool, loosen the cassette lockring.

  • Remove the cassette lockring, then remove the aluminum cassette piece.

Add Comment

Conclusion

Thanks for reading, now get out there and ride!

The Hive

Member since: 12/05/2012

51 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 5

Past 7 Days: 60

Past 30 Days: 314

All Time: 4,335